Neelgiri Chemicals Private Limited

This product is an excellent Antioxidant wnameely applied to polyethylene, polypropylene, polyoxymethylene, ABS resin, PS resin, PVC, engineering plastics, binding agent, rubber, petroleum etc. for product polymerization.

This product is nontoxic, fire-resistive, explosive-resistive and stable in storing, packed in cardboard drum lined with plastic bags with the net capacity, according to customers' demands

Properties:

• Antioxidant SONOX 225 is a kind of compound components, including antioxidant SONOX 1010 and antioxidant SONOX 168.Soluble in benzene, hexane, ethyl acetate, insoluble in water.

CAS No.:

• Antioxidant SONOX 1010 [6683-19-8]
• Antioxidant SONOX 168 [31570-04-4]

Uses:

• It, with good synergistic of antioxidant SONOX 1010 and SONOX 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It is used in polyolefins and olefin-copolymers such as polyethylene, polypropylene, polybutene and ethylene-vinylacetate copolymers. The blend can also be used in other polymers such as engineering plastics, styrene homo-and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates. The amount to be used may be 0.1%??? 0.8%.

Package and Storage:

• Packed with paper-plastic composite bags or cardboard boxes or cardboard pails with PE inner liners, net weight 25kg, or according to customers’ requirements. Store in a cool area designed for the storage of chemicals. Period of validity: Normally 12 months.

This product is an excellent Antioxidant wnameely applied to polyethylene, polypropylene, polyoxymethylene, ABS resin, PS resin, PVC, engineering plastics, binding agent, rubber, petroleum etc. for product polymerization.

Antioxidant 1010 is a non staining, high molecular weight, hindered phenolic antioxidant. Because of its low volatility, Antioxidant 1010 imparts excellent heat stability and color retention, with good compatibility and low extractability. Outstanding for use with peroxide cures due to minimal cure interference.

Antioxidant 1010 finds application in plastics, rubber, latex, varnishes, adhesives, TPR's and hot melts. In plastics, antioxidant 1010 provides excellent antioxidant performance in polyethylene, polystyrene, polyacetal, PVC, AS resin, Methacrylic resin, polycarbonate, polyester, and polymethylpentene as well as many others. In rubbers, antioxidant 1010 can be used in SBR, EPR, EPDM, polybutadiene, Neoprene, Nitrile, Polyisoprene, and many other synthetic rubbers. Typical dosage is 0.02% to 0.50% by Weight FDA regulations with antiox 1010 clearance include 175.105 and 178.2010 (if used according to these regulations, then 177.2600 (rubber articles) will allow 1010 usage).

Specifications:

• Melt Point 110 Degree to 125 Degree C
• Solubility at 20 Degree: Acetone 47%, Benzene 56%, Chloroform 71%, Ethyl Acetate 46%, methyl Alcohol 1%, and Water 0.01%

Multifunctional additive and lubricant for Rigid & Plasticized PVC, Polyolefins, Polyamide, Nylon, Thermoplastic Polyurethane, ABS & Polystyrene.

Plastaid-T is a Multifunctional Processing Aid (MPA) for highly filled polyolefins like filled PP/PE compounds, colour masterbatches, TPO/TPE compounds.

Plastaid-T has sites available for hydrogen bonding and is therefore able to act as a coupling agent between base polymer and filler materials.

Slight variations of the specifications stated due to raw materials and production conditions are possible though they have no influence on the application properties described.

In addition, Plastaid-T can be also used in those standard unfilled polymers where reduced melt viscosity and flow improvement are desired at processing conditions. In many systems better surface appearance with lower and more uniform mould shrinkage is achieved. Property losses are negligible for most compounds at the normal addition levels of Plastaid-T. It is also suggested as a lubricant for polyolefins, PVC, PS, ABS, PET and many of TPO and TPE systems. Plastaid-T is also suitable for epoxy, phenolics, SMC/BMC and other thermosetting compounds. 

Applications:

• Filled PP/PE compounds based on talc, calcium carbonate, glass fibre etc.
• PE based colour masterbatches
• Flame retarded compounds
• Highly filled TPE and TPO compounds
• Rubber modified polymer systems/elastomers
• Thermosetting moulding powder, like PF moulding powder
• SMC / BMC compounds 

Properties:

• Lower viscosity and improved flow at processing temperature
• Better and homogeneous dispersion of fillers and additives
• Higher impact properties in talc filled PP compounds
• Reduced and more uniform mould shrinkage
• Easier mould release in most systems
• Better surface appearance
• Non-blooming properties permit painting or decorating
• Lower die swell
• More homogeneous dispersions of TPO blends and highly filled systems 

Applications and Properties: 

• Finanox-18 (DSTDP) is a secondary antioxidant used in polyolefins and other polymers requiring long term heat ageing properties.
• Finanox-18 particularly decomposes hydroperoxides, formed by auto-oxidation of polymers and neutralizes them. It is often used as synergist in combination with phenolic antioxidants. Finanox-18 (DSTDP) has been approved for use in some food packaging applications.
• Finanox-18 is mainly used in combination with phenolic antioxidants in PE, PP, ABS, Polyester, Polyamides, Acetals, Nylon 6/66, PET/PBT, PC, PS
• Products stabilized with Finanox-18 are widely used in automotives, appliances, containers, PE films, tape, injection & rotational molding, metallocene, PP injection molding, TPO, ABS, sealants, adhesive applications. 

This product is an excellent Antioxidant wnameely applied to polyethylene, polypropylene, polyoxymethylene, ABS resin, PS resin, PVC, engineering plastics, binding agent, rubber, petroleum etc. for product polymerization.

This product is an excellent Antioxidant wnameely applied to polyethylene, polypropylene, polyoxymethylene, ABS resin, PS resin, PVC, engineering plastics, binding agent, rubber, petroleum etc. for product polymerization.

Product Description:

• LP series lubricating processing aids are lubricating processing aids with a unique function, suitable for all PVC products such as sheets, film, bottles, profiles, pipes, pipe fittings, foam sheets, etc.
• Adding small amount of this product during PVC processing & molding procedure can give excellent metal release properties & better fluidity, extend runtime greatly, increase output, and endow better surface gloss to the product. It can be used individually, but more commonly is used together with other processing aids for promoting fusion of PVC resin.

Acrylic processing aids are included in the group of polymer additives which facilitate and regulate the melt flow in thermoplastic productions, with their low utilization rates. Rigid PVC applications have made significant progress since 1950, (the date when processing aids began to be used).