Neelgiri Chemicals Private Limited

• BENTEC ED-22, "Rheological Additive", is a new generation Easily Dispersible Organoclay for system based on Aromatic solvents of low to medium polarity. It gives fully and reliably developed Rheological properties.

• Rheological Additives are used in coatings to provide pigment Suspension, control of Sag, viscosity built up & Flow control.

Advantages:

BENTEC ED-22 has several important and cost saving advantages for Coating Industry.

• It can be added in Powder Form.
• Eliminates preparation of Gel thus saves time & energy.
• Polar activator is not required thus cost savings.
• Easy to disperse.
• It gives batch to batch production consistency.

BENTEC ED-22 can be incorporated with following options:

• Addition to the pigment grind.
• Addition after pigment grinds before letting down mill base.
• Addition during let down.

General Properties:

Mesh Size - 90% minimum through 200 B.S.S mesh
Volatiles (Moisture) - 2 to 4%
Particle size (In Dispersed Condition) - Less than 1 micron BENTEC ED-22 can be used in various industrial coatings like NC Paints, Epoxy Finishes,Chlorinated Rubber Paints, Polyurethane Paints, Thermoplastic solvent/epoxy RoadMarking paint, Hot Melt Thermoplastic Road Marking Paint, etc.

To the best of our knowledge and belief, the above information is accurate. Because the conditions of handing and of use arebeyond our control, we cannot guarantee results, and assume no liability for damages incurred in using our product. The above isnot to be construed as a recommendation for use in violation of any patents or of applicable laws or regulations.Appearance Off White PowderVolatiles (Moisture) 2 to 4%Particle size (In Dispersed Condition) Less than 1 MicronMesh Size 90% minimum through 200 B.S.S meshPacking 25 Kgs PP bags with liner

BENTEC ED-11, “Rheological Additive", is a new generation Easily Dispersible Organoclayfor system based on Aliphatic & other solvents of low to medium polarity.

• It gives reliable developed Rheological properties.
•  Additives are used in coatings to provide pigment suspension, control of Sag,viscosity built up & Flow control.

Advantages:

BENTEC ED-11 has several important and cost saving advantages for Coating Industry.

• It can be added in Powder Form.
• Eliminates preparation of Gel thus saves time & energy.
• Polar activator is not required thus cost savings.
• Easy to disperse.
• It can be added for correction of batch - Post Addition.
• It gives batch to batch production consistency.

BENTEC ED-11 can be incorporated with following option:

• Addition to the pigment grind.
• Addition after pigment grind before letting down mill base.
• Addition during let down.
• Post addition.

To the best of our knowledge and belief, the above information is accurate. Because the conditions of handling and ofuse are beyond our control, we cannot guarantee results, and assume no liability for damages incurred in using ourproduct. The above is not to be construed as a recommendation for use in violation of any patents or of applicablelaws or regulations